Free IVA

Issues

• Make "solid" versions of hatches for blocked nodes

  #42 opened2 years ago by JonnyOThan
  0

• Windows in distant parts will show the part exterior instead

  #41 opened2 years ago by JonnyOThan
  4

• Implement moving in gravity

  #40 opened2 years ago by JonnyOThan
  0

• Support animated hatches

  #39 openeda year ago by JonnyOThan
  0

• Give unbuckled kerbals a body

  #38 opened2 years ago by JonnyOThan
  0

• Clicking handles isn't working

  #37 opened2 years ago by JonnyOThan
  0

• Add PartInfo for passable parts

  #36 opened2 years ago by JonnyOThan
  0

• Handle vessel modifications

  #35 opened2 years ago by JonnyOThan
  0

• Prevent going EVA when there is an attached part

  #34 opened2 years ago by JonnyOThan
  0

• Need to lock out animated docking ports when closed

  #33 opened2 years ago by JonnyOThan
  0

• Rotation should be relative to the vessel/part when landed in gravity

  #32 opened2 years ago by JonnyOThan
  0

• Implement "open when attached"

  #31 opened2 years ago by JonnyOThan
  0

• Add attachment node to kv2 and kv3 pods

  #30 opened2 years ago by JonnyOThan
  0

• Build custom IVAs for certain parts

  #29 opened2 years ago by JonnyOThan
  0

• Build a system to use external model as internal

  #28 opened2 years ago by JonnyOThan
  1

• Handle surface attached docking ports

  #27 opened2 years ago by JonnyOThan
  0

• Build a pass through system

  #26 opened2 years ago by JonnyOThan
  0

• Set up handle colliders on hatch props

  #25 opened2 years ago by JonnyOThan
  0

• Investigate setting up mesh cutters in hatch props

  #24 opened2 years ago by JonnyOThan
  0

• Need tube connectors for parts

  #23 opened2 years ago by JonnyOThan
  1

• Hatches on endcaps need to use a consistent scale

  #22 opened2 years ago by JonnyOThan
  0

• Depth Mask doesn't apply correctly immediately after opening a hatch

  #21 opened2 years ago by JonnyOThan
  0

• Going EVA from a hatch that isn't in the part you were seated in doesn't work

  #20 opened2 years ago by JonnyOThan
  0

• Move object deleting to internal module and execute on load

  #19 opened2 years ago by JonnyOThan
  0

• Move Mesh Cutting to internal module and execute it on load

  #18 opened2 years ago by JonnyOThan
  0

• Move airlock setups from KerbalVR

  #17 opened2 years ago by JonnyOThan
  0

• Internal colliders should be baked into models

  #16 opened2 years ago by JonnyOThan
  0

• Opening a hatch that is not connected to another should boot you to EVA

  #14 opened2 years ago by JonnyOThan
  0

• Implement mesh cutting for hatch holes

  #13 opened2 years ago by JonnyOThan
  0

• PropHatch should not use prop indices

  #12 opened2 years ago by JonnyOThan
  1

• Check hatches for all stock parts

  #11 opened2 years ago by JonnyOThan
  0

• Re-buckling doesn’t seem to work properly

  #10 opened2 years ago by JonnyOThan
  0

• Seat_Pilot and Seat_Passenger props need seat belt or harness

  #9 opened2 years ago by JonnyOThan
  0

• Figure out correct layer for kerbal

  #8 opened2 years ago by JonnyOThan
  0

• Make key controls match ThroughTheEyes

  #7 opened2 years ago by JonnyOThan
  1

• Depth masks are too tall

  #6 opened2 years ago by JonnyOThan
  1

• MEM lander needs a hatch in the ceiling

  #5 opened2 years ago by JonnyOThan
  0

• Probe control room doesn’t work

  #4 opened2 years ago by JonnyOThan
  1

• Inflatable airlock support

  #3 opened2 years ago by JonnyOThan
  1

• Kerbal noclips out of the spacecraft when unbuckling

  #2 opened2 years ago by Joey-Destroyah
  3

• Release?

  #1 opened4 years ago by RMuskovets
  3