[Bug] Advanced Inscriber took items without giving an output.
Endermod opened this issue ยท 9 comments
KitStead - Do you have items being grabbed up from the Adv Inscriber with an Import bus to you AE2 system?
I've been having an issue where it will produce a handful of the requested items, then the import bus pulls the output items (stopping the operation) and when it takes the last item it doesn't give the inscriber back the operation unless you remove the bus. This seems like it could be the same one, except you don't mention the import bus.
I've tried a number of work arounds, including a Thermal Energistics Item duct with Hardened servo, but it still locked up.
If this isn't the same problem please let me know so I can open a bug report on it.
Edit: Try adding a connection to an ME cable without an interface if you don't have one. I tried that and my first test worked through. My second was to add that connection on a stuck Adv Inscriber and it started working again. I think the buses and interfaces do not supply power or not enough.
Busses don't supply power, neither do microblock interfaces. Full block interfaces supply power but only if they aren't "pointing" at the block.
To be be clear, your input bus issues were fixed by running a separate power line to the inscriber?
Yes. Also I discovered after the post that I still had the issue with just the interface attached. It was what led me to try the separate line.
Does it have enough power to run? It consumes items at the start of the operation (unlike AE2 inscriber).
Also what versions of both mods?
I had the same. Definitely enough power. Running appliedenergistics2-rv2-stable-10 with ae2stuff-0.4.3.47-mc1.7.10
I've tried and can't reproduce this.
Did it start processing then didn't gave an output? Or did it just took the items whith the progress bar not moving?
As soon as the item was placed in, it was consumed. The front animation happened instantly and quick. Then nothing. No output. I had pipes attached (thermal dynamics) with and without servos. Nothing entered the pipe system and nothing was returned when the inscribers or pipes where broken.
