Filler not clearing
Krutonius opened this issue · 2 comments
I set my filler to clear an area and it does not. It is supplied with power from a hardened energy cell and pipe via thermal expansion. It will fill, pyramid, square, etc but does nothing when set to clear.
Also, when first set to clear, it filled in holes, and then did not clear.
Are you using “Clear” or “Level”? Also, did you determine a 3d cube to be cleared or just a plane? If trying to clear an area to open sky above, use “Horizon”. Just make sure there’s nothing above the filler that you want to keep.
De: Keaton [mailto:[email protected]]
Enviada em: quinta-feira, 13 de fevereiro de 2014 04:36
Para: BuildCraft/BuildCraft
Assunto: [BuildCraft] Filler not clearing (#1432)
I set my filler to clear an area and it does not. It is supplied with power from a hardened energy cell and pipe via thermal expansion. It will fill, pyramid, square, etc but does nothing when set to clear.
Also, when first set to clear, it filled in holes, and then did not clear.
—
Reply to this email directly or view it on GitHub #1432 . https://github.com/notifications/beacon/2696392__eyJzY29wZSI6Ik5ld3NpZXM6QmVhY29uIiwiZXhwaXJlcyI6MTcwNzgwNjE4NSwiZGF0YSI6eyJpZCI6MjU1Nzg3Njd9fQ==--f42fa3fbd16d8101cdec555d8d42d47b7a05746d.gif
Este email está limpo de vírus e malwares porque a proteção do avast! Antivírus está ativa.
http://www.avast.com
I tried both clear and level and neither worked. I followed someone using a filler from version 4.2.1 because no one has a tutorial in English for 4.2.2.
So what I did was put down 3 land marks and I guess I was only marking a 2d plane and not a cube. I will try the horizons mode then.
Thank you for your help and finalsilvers help last night. I apologize for using this site as support more than bug report. I just already had a github profile :)
Thanks again ill use support forums from now on
Sent from my Windows Phone
From: BioMechVSSmailto:[email protected]
Sent: 2/13/2014 5:54 AM
To: BuildCraft/BuildCraftmailto:[email protected]
Cc: Keatonmailto:[email protected]
Subject: Re: [BuildCraft] Filler not clearing (#1432)
Are you using “Clear” or “Level”? Also, did you determine a 3d cube to be cleared or just a plane? If trying to clear an area to open sky above, use “Horizon”. Just make sure there’s nothing above the filler that you want to keep.
De: Keaton [mailto:[email protected]]
Enviada em: quinta-feira, 13 de fevereiro de 2014 04:36
Para: BuildCraft/BuildCraft
Assunto: [BuildCraft] Filler not clearing (#1432)
I set my filler to clear an area and it does not. It is supplied with power from a hardened energy cell and pipe via thermal expansion. It will fill, pyramid, square, etc but does nothing when set to clear.
Also, when first set to clear, it filled in holes, and then did not clear.
—
Reply to this email directly or view it on GitHub #1432 . https://github.com/notifications/beacon/2696392__eyJzY29wZSI6Ik5ld3NpZXM6QmVhY29uIiwiZXhwaXJlcyI6MTcwNzgwNjE4NSwiZGF0YSI6eyJpZCI6MjU1Nzg3Njd9fQ==--f42fa3fbd16d8101cdec555d8d42d47b7a05746d.gif
Este email está limpo de vírus e malwares porque a proteção do avast! Antivírus está ativa.
http://www.avast.com
Reply to this email directly or view it on GitHub:
#1432 (comment)