AE2 energy acceptors do not pull energy out of a block, so there needs to be an another mod to act as a bridge or use AE2s own enegy generation.

Potential fix to this would be to make the flux generators push FE automatically to adjacent blocks.

Flux Generators automatically emit power on the "Red" Dot.
and we used them with AE.

And i tested that it works.

Sorry, I cannot get it to work on my end. I'll try to see if its some conflict with another mod

Does it work with the Controller?
Because that is what i used for testing.

I'll try with just AE2 and IC2, and test it with just the controller

Yes, it works if you plug it directly to a controller, but doesn't seem to work if you try to power an energy acceptor

@shartte and @Technici4n would you care to explain why the Energy Acceptor isn't working?

oh yeah @Vapaman small warning from a bug that ME is aware of but choose to ignore.
If you break and replace the controller after it attached to a Flux generator the second controller won't receive power.
(Due to them not supporting a essential forge feature)

If you break and replace the controller after it attached to a Flux generator the second controller won't receive power.

Can replicate

Yes that will happen due ic2c using a new forge feature that allows caching. This is a major performance increase, and while there are rare cases of mods being out there not supporting it, so far outside of AE everyone fixed it the moment i reported it.

Simple fix for you is: break and replace the ic2c block to reset the cache.