Issue #1:Flux Generators only supply flux to machines that are at the north facing side of the generator. Issue #2: Flux generators sometimes do not work if the power supplied to them goes through a transformer (proper wireing, proper type of transformer). Issue #3: Flux generator can still accept EU through the flux outputting side if rotated with a wrench.
OHOgameplay opened this issue ยท 1 comments
Issue#1: They only provide flux to the block facing to the north. It is also not affected by the actual generator output side.
Any of the 6 sides that faces towards north will supply the flux accepting block there
Issue#2: Tried to reproduce, but no luck. Maybe a one time local bug.
Issue#3: If i place a generator, and connect it to a grid (connected to any of the 5 EU inputs), after rotating the block with a wrench to a point, where the flux output is connected to the EU cable, it still accepts EU, and supplies flux to a block (if it is at the north facing side)
Normally it should not connect, like this:
But it connects, like this:
To rotate, i used the Crescent Hammer from Thermal Series.
The IC2 Wrench does not rotate the generator to that stage if the cable is connected.
