Description of the issue:

I wanted to do some tests on one of my dedicated profiles for this when I noticed a connection problem on Immersive Engineering cables. In both cases, I feel that the connections are really random and sometimes, they are done correctly. This bug is just visual, the energy circulation is functional.

Versions & Modlist:

Forge version: 14.23.4.2707 (latest) (teste with 2705 also)
IE: 0.12-82
Other mods used (from forced crash report): https://gist.github.com/freelancerleno/0470199fc1d86c75fea93c67e72badee

Normally, I also use mods like Optifine but to discard these mods in possible conflicts, I removed them all for my tests.

Tests with all mods listed in the gist:
First wiring attempt:
https://prnt.sc/jroyql
Second wiring attempt:
https://prnt.sc/jrp03v
I also see that thing:
https://prnt.sc/jrp0o9

Of course, I tested with Forge and Immersive Engineering without any other mods:
https://prnt.sc/jrp1q6

Thanks!
(Sorry for my bad english)

I have sometimes the same visual glitch, if I destroy 1 relay or connector and replace him again at the same position, this little wire (from freelancerleno 3. picture) occures in relation to the old wire way to the connected relay / connector.

(I hope you know, what I mean :D )

The issue is with the transformers attached to the poles - they somehow have wrong offsets/positions for their connectors. It helps if you put a MV relay directly next to the transformer and connect via that as it hides the bad connection inside the transformer.

I'm getting a lot of these, with both the Transformer and the HV Transformer:

"Annoyingly" it doesn't always happen... seems to somehow depend on where things are and the distance between them... 🤔