Pumpjacks won't output to fluid pipes [USER ERROR, not a bug]
MGTN-Nurin opened this issue · 6 comments
Minecraft Version
1.16.5
Immersive Engineering Version
5.1.0-148
Immersive Petroleum Version
3.4.0-13
Current Behaviour
Built pumpjack multiblock, formed it with the engineer's hammer and hooked up the IE fluid pipe to it to link it back to the refinery area I built. Wired it to power grid and it remained inert even after reforming it and replacing the fluid pipe. Placing a storage medium caused it to function as it should, and promptly filled it.
Expected Behaviour
Pumpjack exporting through the fluid pipe to refinery area for refinement in the Distillation Tower.
Reproduction Steps
- Built pumpjack
- Built distillation tower
- Connected required power sources and fluid transfer blocks
- Activate
Debug Crash Log
https://gist.github.com/MGTN-Nurin/a22e00703204b3183de7a58b70f24f3d
Information for the reader.
- Add a 👍 to the bug report if you are also affected. This helps show the severity of this bug report and doesn't clutter the comments.
- Add a comment if you have any insights or background information that isn't already part of the conversation.
Yes, pumpjack was correctly placed in a chunk that was confirmed to have a crude oil reservoir
So the head of the pumpjack is still within the chunk?
The pipes connect to an input? (Marked Blue)
(Screenshots would be nice too)
Confirmation that the chunk is an oil chunk [can also see that the pumpjack is within the same chunk by the minimap]
Showing positive connection into pipe
Which feeds all the way to the end of the tunnel
And feeds into the distillation tower
Last image, thats an output. The fluid input is below where the power goes in on the right.
On the left is output, and on the right is oil input.
