[Bug] OCP Vulcanair is unable to move
StarterCraft opened this issue · 5 comments
I had assembled a OCP Vulcanair in my hangar, and I had tried to move it directly from the build position, but I couldn't. I had switched off my parking brake and checked for any collisions with no result.
Yes. The plane was able to move outside of the hangar. I had even thought that an aircraft can't move when standing on steel scaffolding slabs, I had replaced them with a vanilla wool, but this did not help.
Likely this is due to some block in your hangar preventing movement. If you can back the plane into the hanger, you should be able to find out which block is blocking you. Either way, this isn't an issue with the mod.
I already checked the chance of any collisions, as I already said. The only
blocks I have in my plane building area are the Immersive Engineering steel
scaffolding slabs and the steel block's slabs.
чт, 13 февр. 2020 г., 22:32 DonBruce64 <[email protected]>:
… Likely this is due to some block in your hangar preventing movement. If
you can back the plane into the hanger, you should be able to find out
which block is blocking you. Either way, this isn't an issue with the mod.
—
You are receiving this because you modified the open/close state.
Reply to this email directly, view it on GitHub
<#305?email_source=notifications&email_token=AKMAHZJ4MJN75IWSUVRKCWDRCVKYTA5CNFSM4KTZ4BT2YY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOELVFWGQ#issuecomment-585784090>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/AKMAHZIX57YIYM44AD2BU5DRCVKYTANCNFSM4KTZ4BTQ>
.