Info
Running modpack ATM 1.5.10
Modified Pipez config (to be equal to mekanism transfer speed)
Attached is the used config file https://pastebin.com/HXSrGtiN

Issue
The issue seems to be as followed. When using pipez in combination with a mekanism QuantumEntangloporter and Thermal expansion it massively drops the TPS. Please note that just building a quick 1 Thermal expansion machine does not do the trick Please see below the setup that was used together the the Spark mod output info

Setup: https://ibb.co/1T8M2j3
Note that ONLY the machine on the right top is smelting zinc/copper dust to make Create brass.
All other machines remain off !
Profiler ran for 30 seconds before switching to the next setup

Idle mode: 20 TPS
https://spark.lucko.me/ktH6PXrSus

• Setup 1: Server running at 20 TPS
  https://spark.lucko.me/u0GRfvLAyv
• Setup 2: Server running at 20 TPS
  https://spark.lucko.me/SB7k6MMTCy
• Setup 3: Server running at 20 TPS
  https://spark.lucko.me/ib7U6YirpA
• Setup 4: Server running at 10 TPS
  https://spark.lucko.me/aAUWOHCVfT
• Setup 5: Server running at 4 TPS
  https://spark.lucko.me/cJwkkO0Y1b
• Setup 6: Server running at 4 TPS
  https://spark.lucko.me/7UGCGOeXn8
• Setup 7: Server running at 4 TPS
  https://spark.lucko.me/09G8Qe3S3e
• Setup 8: Server running at 4 TPS
  https://spark.lucko.me/dLIna1xOGR

Afterwards back in idle mode: https://spark.lucko.me/oRJhYue88x

Please use a template when creating an issue.