All the Mods 8 - ATM8

All the Mods 8 - ATM8

9M Downloads

Unable to Import All the Ores Slurries with Applied Mekanistics

avedium opened this issue ยท 2 comments

commented

Playing All the Mods 8 v1.0.21b

I am unable to import any slurries from the All the Ores mod. I'm able to import other chemicals, although I'll admit I did not try them all. Here's what I tried in a creative world:

  1. Constructed an ME system with a controller and a disk drive with a 256k chemical storage drive.
  2. Attached an external storage bus set to extract only on a creative chemical tank with clean allthemodium slurry. Does not appear in the ME system, became confused.
  3. Tried replacing the external storage bus with an import bus. Still no results.
  4. Replaced the creative tank with an ultimate one. No results.
  5. Replaced allthemodium slurry with sulfuric acid. Import bus and storage bus work nominally.

I attempted to report this to the Applied Mekanistics team, and they requested I reach out here considering All the Ores is not open source.

Thanks for any help with this! I was excited to finally elegantly automate Mekanism ore quintupling. :)

commented

Firstly, here is the link to the issue I opened with Applied Mekanistics.

Secondly, further testing done:

  1. Broke the storage bus on the chemical tank.
  2. Broke the ME drive.
  3. Reattached the storage bus. Works nominally.
  4. Readded the ME drive. Nominal.
  5. Broke and replaced the storage bus. Nominal.

Here is my creative testing world still in a state where the importer is not functioning as intended.

commented

Solution by ramidzkh:
"The issue is you had the gas type as output, and appmek was trying to pull gasses instead of continuing to the other chemicals. You can just close everything but the chemical type you want for now, but I'll make a fix."