Mekanism DMiner has hard time with Tin in the Deep Dark
metnavman opened this issue · 14 comments
Modpack version
1.59a
Can the issue be reproduced?
Yes/
Issue
Digital Miner doesn't seem to like mining for Tin in the Deep Dark. Attempting to set the Radius causes it to fail to register any of the ore, but only for Tin. Dropping the Radius down to "25" from "32" works sometimes, other times, the Radius has to get dropped down to "18" or "15" or lower. At that point, it will find and mine the Tin, but anything over a specific number towards max, and it completely fails to find it. Only Tin though....
Hiya! oreCopper works perfectly. I actually didn't notice the issue until the Miner only pulled Copper and Iron, while skipping Tin completely when set to the "32" radius. That's what led me to the initial troubleshooting.
It's very strange. I'd expect it to have the opposite problem, where it doesn't find Tin when you shrink the Radius, instead of pushing the Radius higher. I don't get it!
Imgur
Post with 0 views.
Linking for good meassure: mekanism/Mekanism#5398
Having the same issue, for me the range doesn't seem to affect it, i can still get tin using oredict for ore* but not oreTin or oreT*. searching by modID for thermal foundation also gets tin alongside all the other TE ores. This had previously worked before updating to 1.59a
So I've done some more testing and the issue occurs when there's a thermal foundation oil shale block within the search range of the miner (still can't reproduce this in the overworld though)
Edit: Workaround then is to set miner to mine both the tin and the oil shale (just having the shale in the filter list lets it detect and mine the tin, it doesn't have to clear out all the shale first)
I just tried to replicate this issue on 1.64d with a Digital Miner in the Deep Dark using the following filters:
*ore**oreTin*oreTin*oreT*oreCopper*oreCopper**oreC*
All of them result in it mining the ores I expect.