Required mods:
- BD armory
- Heat resistant parts
- Firespitter
- KAX
- Super strong struts
- Magic smoke industries infernal robotics
- Tweak scale
Download link:
Here comes my new recreation of UH60 in KSP. Well, it was quite difficult for me to make my first helicopter. At last it comes with a quite promising stability maneuver. This US helicopter is designed to transport troops and supply, medical evacuation. Generally it is one of the symbol helicopter of marines and it is a great multitasking craft. I really enjoy flying this! But you need to practice to get familiar with her. I tried to make every single details of the real UH60, so I hope you enjoy.
Take off procedure:
- Press “T” and “X”
- Press “Brake”
- Close door by pressing “L”
- Press “Space” to start four main engines and tail rotors
- Heat up engines for 1 minute!
- Slowly increase the thrust to 75% by pressing “Shift” (I suggest you to switch of the signal of windows which appears when you press shift 5 times.)
- Slightly push the nose down and take off
- Keep the power about 70% and keep the nose down -10 degrees to fly forward.
After take off procedure:
- Gear up
- Jettison tanks when its finish fuel
Landing procedure:
- Shut down the two turbo engines just behind the main rotor
- Keep the power lower than 70%
- Lower rear gear
- Nose up to reduce speed
- Slowly decrease altitude at rate of 5m/s
- When it gently touches down press “X”
And if you crushing it, don’t mind. I might tell you try again you need some practice to become helicopter pilot. My next battle helicopters will come soon!
Good luck!